伴随着电子产业的发展趋势，菲尼克斯端子的运用范畴越来越多，用以完成电气连接的一种部件商品。那么菲尼克斯端子本身的样子是怎样的？

　　With the development trend of the electronic industry, the use of Phoenix terminal more and more categories, to complete the electrical connection of a component goods. So what does the Phoenix terminal itself look like?

　　菲尼克斯端子由绝缘基座、绝缘隔板、线件组成，绝缘基座组成一体，接线件座于绝缘基座上并置于绝缘隔板内，接线件包含导线夹、螺钉、螺母和支承框，支承框呈U形，导线夹置于支承框内，螺母和螺钉沿支承框U形两头面的长形孔压住导线夹。

　　Phoenix terminal consists of insulating base, insulation plate, wire, insulation base composition, connection parts on the insulating base and placed in the insulating clapboard, connection piece contains wire clamp, screw, nut and bearing box, bearing box is u-shaped, wire clip in the bearing box, nut and screw down the bearing box u-shaped two head long hole pin wire clip below.

　　导线夹由上导线夹和导电片组成，上导线夹外表两边突起多排凸块，凸块上有一二条凸筋，其特征是导电片上外表两边突起多排凸块，菲尼克斯端子凸块与上外表中部组成圆弧，圆弧面上有一二条凸筋，凸块与凸块形成锯齿形。

　　Wire clamp is made up of wire clamp and conducting strip, wire clip appearance on both sides ridges more convex block, block on one to two convex rib, is characterized by conductive sheet bulging appearance on both sides more convex block, central phoenix terminal lug and the appearance of circular arc, arc surface has one or two convex rib, serrated convex block and the convex block formation.

　　导电片上外表中段为一凸起渠道，渠道中心开有螺纹孔与绝缘基座经螺栓相连，导电片下外表两头各突起一个定位圆块与U形支承框相连，菲尼克斯端子两块上导线夹分别置于导电片渠道两边并与导电片夹合在一起时，菲尼克斯端子上导线夹与导电片凸块（相互错开咬合将导线夹住）。

　　The middle part of the surface of the conductive sheet is a raised channel, threaded holes are opened in the center of the channel and connected with the insulating base by bolts, a positioning round block is raised at both ends of the surface of the conductive sheet and is connected with the U-shaped supporting frame, phoenix terminal two wire clips are respectively placed on both sides of the conductive sheet channel and together with the conductive sheet clip, Phoenix terminal wire clip and conductive strip convex block （staggered bite each other to clamp the wire）。

　　菲尼克斯端子装置扣位能够起到更加稳固地固定到PCB板上，锁定扣位能够在装置完成后锁定母体和插座。各式各样的插座规划能够搭配不同母体的刺进办法，比如说：水平、笔直或倾斜向印刷电路板等，能够依据客户的要求挑选不同的方法，能够挑选公制线规也能够挑选标准线规。

　　The Phoenix terminal device fastener can be used to secure to the PCB, and the locking fastener can be used to lock the parent body and socket after the device is complete. A variety of socket planning can be matched with different penetration methods, such as: horizontal, straight or inclined to the printed circuit board, etc., can choose different methods according to customer requirements, can choose metric wire gauge can also choose standard wire gauge.

　　菲尼克斯端子本身的样子是怎样的？如果您想了解更多关于该产品的内容点，就来网站www.jntongyu.com联系我们吧！

　　What does the Phoenix terminal itself look like? If you want to know more about this product, please contact us at www.jntongyu.com!