Circuit installation is a crucial step in house decoration, and now there are more and more household appliances, so it is necessary to install leakage protector at home, which can improve the safety of household electricity. What is the wiring method of leakage circuit breaker? What are the misconceptions in the wiring of leakage protector? Let's follow Xiaobian and have a look!

一、漏电断路器接线方法是什么

1、 What is the wiring method of leakage circuit breaker

漏电断路器外壳标有负载与电源的字样，接线时应将电源进线与标有电源的接口相连，出线则与标有负载的接口相连，且接线时需按照左火右零的方式进行，如果不知道哪根线为火线，可以使用电笔进行检测，与电线接触后若电笔感应灯发光，该线路就为火线。

The shell of the leakage circuit breaker is marked with the words "load and power". During wiring, the incoming line of the power supply shall be connected with the interface marked with the power supply, and the outgoing line shall be connected with the interface marked with the load, and the wiring shall be carried out in the way of left fire and right zero. If you don't know which line is the live line, you can use the electric pen for detection. After contacting with the wire, if the electric pen induction lamp lights up, the line is the live line.

二、漏电保护器接线误区有哪些

2、 What are the misconceptions in the wiring of leakage protector

1、漏电保护器的每根直线都有各自专用的零线，且不可以将两根相邻的零线连接在一起，否则会对漏电保护器工作电流的平衡造成破坏，使用漏电保护器的过程中容易出现误动作，甚会引发触电事故。

1. Each straight line of the leakage protector has its own special zero line, and two adjacent zero lines cannot be connected together, otherwise the balance of the working current of the leakage protector will be damaged, and misoperation is easy to occur in the process of using the leakage protector, and even electric shock accidents will be caused.

2、漏电保护器接线过程中，每个用电设备只可以与一条保护支路相接，也就是说用电设备不能同时与两条分支回路相接，否则漏电保护器也会出现误动作，导致漏电保护器无法正常使用。

2. During the wiring process of leakage protector, each electric equipment can only be connected with one protection branch, that is to say, the electric equipment can not be connected with two branch circuits at the same time, otherwise the leakage protector will also malfunction, resulting in the failure of normal use of leakage protector.

3、用电设备安装漏电保护器之后，不能与未安装漏电保护器的用电设备使用同一个接地装置，因为未安装漏电保护器的用电设备也带有电，但电流未经过漏电保护器，所以不具备漏电保护的作用。

3. After the electric equipment is installed with leakage protector, it cannot use the same grounding device as the electric equipment without leakage protector, because the electric equipment without leakage protector also has electricity, but the current does not pass through the leakage protector, so it does not have the function of leakage protection.

总结：ABB微型断路器/漏电断路器接线方法有哪些的相关内容就为大家介绍到这里了，安装漏电保护器的时候，前腰要分清楚保护线及中性线，且不可将保护线与漏电保护器相接。如果您想了解更多知识，可以关注我们网站资讯http://www.jntongyu.com。

Summary: the price of ABB miniature circuit breaker / the wiring method of leakage circuit breaker will be introduced here. When installing leakage protector, the front waist should distinguish the protective line and neutral line, and the protective line should not be connected with the leakage protector. If you want to know more, you can pay attention to our website information http://www.jntongyu.com 。